Commonly Asked Questions About BrickShield LEGO Spray
BrickShield LEGO Spray is a fantastic product designed to protect your LEGO creations without using glue. It provides an easy way to keep your builds intact while still maintaining their disassemblable nature. If you’re considering using BrickShield for your LEGO masterpieces, you might have a few questions. Here are some of the most commonly asked questions about BrickShield LEGO Spray:
1. What is BrickShield Spray?
Answer:
BrickShield LEGO Spray is a clear, non-toxic spray designed to temporarily secure LEGO bricks in place, ensuring your LEGO creations remain intact while on display. It doesn’t use glue, so you can still disassemble and rebuild your model whenever you wish. It's the ideal solution for keeping your LEGO models secure without making permanent changes to your pieces.
2. How does BrickShield Spray work?
Answer:
BrickShield works by coating the joints between LEGO bricks with a temporary, invisible bond. The spray creates a thin layer of protection that holds your creation together, preventing pieces from slipping apart. While it secures your model for display, it doesn’t permanently bond the bricks, meaning you can still take the model apart when you're ready to build something new.
3. Is BrickShield Spray safe to use?
Answer:
Yes, BrickShield LEGO Spray is non-toxic and safe to use. It’s designed specifically for LEGO bricks, so it won’t damage your pieces or affect the colors of your LEGO bricks. However, as with any spray product, it’s important to use it in a well-ventilated area and follow the usage instructions for the best experience.
4. Can I use BrickShield Spray on any LEGO set?
Answer:
Yes, BrickShield Spray can be used on any LEGO set or creation. Whether you're building a standard LEGO set or a custom creation, BrickShield will work to protect your model. It’s especially useful for larger or more intricate builds that may be at risk of falling apart during display or transportation.
5. Does BrickShield Spray affect the LEGO bricks in any way?
Answer:
No, BrickShield Spray does not permanently affect the LEGO bricks. The spray forms a temporary bond that secures your build, but it doesn’t alter the bricks themselves. This means you can still disassemble your model when you're ready to start a new project.
6. How long does BrickShield Spray take to dry?
Answer:
BrickShield typically takes 4-8 hours to dry completely, depending on the size of your build and the number of layers you apply. It’s important to let each layer dry fully before applying the next. If you’ve applied several coats, it may take a little longer for the final coat to dry.
7. How many coats of BrickShield should I apply?
Answer:
For most builds, 2-3 coats of BrickShield are sufficient to keep your LEGO model secure. Start with a light coat, allow it to dry, and then apply additional coats if necessary. Be sure to let each coat dry fully before applying the next to ensure an even and strong bond.
8. Can I remove BrickShield Spray?
Answer:
Yes, BrickShield LEGO Spray is removable. If you want to change your build or reuse your LEGO pieces, you can remove the spray by gently applying warm water and using a soft cloth or sponge to wipe off the coating. You can also use a small amount of dish soap if needed. Once the spray is removed, your LEGO bricks will be free of any residue, and you can continue building as usual.
9. Does BrickShield Spray leave a sticky residue?
Answer:
No, BrickShield LEGO Spray does not leave a sticky residue on your LEGO pieces once it dries. The spray forms a clear, non-sticky layer that keeps your pieces securely in place. After application and drying, your LEGO bricks will remain clean and ready for display.
10. How do I apply BrickShield Spray?
Answer:
To apply BrickShield LEGO Spray, follow these steps:
- Prepare your work area – Ensure you are in a well-ventilated space and lay down protective paper or cloth.
- Shake the can – Shake the can thoroughly before use to ensure an even spray.
- Apply a light, even coat – Hold the spray can 6-8 inches (15-20 cm) from your LEGO build and spray evenly over the surface.
- Allow to dry – Let the spray dry for 30-60 minutes.
- Apply additional coats if needed – For extra security, apply 2-3 coats, allowing each layer to dry before adding more.
11. Can I use BrickShield Spray for large builds?
Answer:
Yes, BrickShield is perfect for large builds, as well as smaller projects. It’s especially useful for large or complex models that are more likely to fall apart during handling or while on display. Just be sure to apply the spray in thin, even coats to ensure the entire build is secured.
12. Can I still modify my LEGO build after using BrickShield?
Answer:
Yes, you can still modify your build after using BrickShield. Since the spray is removable, you can safely disassemble your model and rebuild it whenever you want. The spray only creates a temporary bond, so you’re not limited to keeping the model intact permanently. If you decide to take your creation apart, simply remove the spray as described earlier and get ready for your next build!
13. Is BrickShield Spray suitable for all ages?
Answer:
Yes, BrickShield LEGO Spray is safe for all ages when used as directed. It’s non-toxic and doesn’t contain harmful chemicals, making it suitable for kids, teens, and adults alike. However, as with any spray product, it’s always a good idea to supervise younger children when using it to ensure safe handling.
14. Where can I buy BrickShield Spray?
Answer:You can purchase BrickShield LEGO Spray directly from the official website here, where it’s available for purchase online. Be sure to check for special offers, bundles, or discounts around the holidays!